Working With The Automatic Leveller; Working Without The Automatic Leveller; Working With The Tripod - Parkside Performance Pkllp 360 A1 Originalbetriebsanleitung

GB IE
Press the On/off
switch (14) briefly:
360-degree laser line
Working with
the automatic
leveller
1. Push the automatic
leveller (13) to the right
(open lock).
2. Place the device on a
horizontal, solid surface
or fasten the device to
a tripod (see "Working
with the tripod").
3. Turn on the device.
The leveller light (19) will
light up:
Green: if automatic level-
ling is possible.
Levelling is complete
once the laser lines no
longer move.
Red: if automatic levelling
is not possible.
The laser lines will
flash and longer be at
exact right-angles to
one another.
The laser line will
flash.
24
In the event of vibra-
tions, the laser will level
itself automatically; wait
until the laser lines no
longer move.
Working without
the automatic
leveller
The leveller light (19)
will illuminate perma-
nently in red when working
without the automatic level-
ler. The laser lines depicted
are not levelled.
1. Push the automatic
leveller (13) to the left
(closed lock).
2. Turn on the device.
Working with the
tripod
Screwing the laser
onto the tripod mount
1. Screw the internal th-
read (20) of the device
hand tight onto the tri-
pod screw (21).