Werbung
Verfügbare Sprachen
Verfügbare Sprachen
In order to safely operate the tool, please observe the following notes:
Details to the work area
!
!
!
!
!
!
Space requirements for operations and maintenance
Keep a free space for operations and maintenance of about 2 m around the drill,
whenever possible, so that you can work safely and have immediate access in
case of a malfunction.
Preparation
!
When drilling into blocks make sure that they are well fixed and fastened.
!
Before drilling into load-bearing elements, make sure that the foundation are
not damaged. Follow the instructions of the specialists responsible for the
planning.
!
Make sure not to damage gas or water pipes or power lines during drilling.
!
Make sure that the drill core will not hurt anybody or cause damage to
anything when falling out. Clear and secure the work area.
!
When drilling through holes through ceilings, secure the area from below, as
the drill core may fall downwards.
!
If the drill core could cause damage when falling down, set up a construction
to hold back the drill core.
!
Make sure that the drill bit is fixed correctly.
!
Use the correct tools appropriate for the material to be worked upon.
!
Take care that the drill stand is attached firmly to the surface.
Downloaded from
www.Manualslib.com
Operating the drill unit
Keep the work area free of everything which could obstruct operations.
Provide for adequate illumination of the work area.
Adhere to the regulations concerning the power supply.
Install power lines in such a way that any damage by the drill can be
avoided.
Make sure to always keep the work area in view and to be able to reach
all necessary operating elements and safety installations.
Keep other persons away from your work area in order to avoid
accidents.
Drilling
manuals search engine
21
Werbung
