Makita DBM230 Betriebsanleitung Seite 17

Equipment characteristics
Wet Diamond Core Drill DBM 230
Rated Voltage:
Rated Power Input:
Rated Current:
Frequency:
max. Drilling Diameter:
Holding fixture:
Insulation Class:
IP Rating:
Net Weight:
Interference Suppression:
The Wet Diamond Core Drill DBM 230 shall only be operated by trained
personnel!
The DBM 230 in connection with wet core drill bits is designed for drilling in
concrete, stone and masonry for wet cutting only.
The tool may only be used in conjunction with a suitable diamond drilling
stand (P-54190).
Important directions and safety precautions are represented by symbols on the
tool.
Downloaded from www.Manualslib.com
Gear No-Load Speed
Prescribed use
Safety precautions
Read these instructions carefully and completely and adhere to
them strictly in order to ensure safe working conditions.
In addition, the general safety regulations in the annexed
brochure must be observed. Before using the tool for the first
time, ask for a practical demonstration.
manuals search engine
40 - 60 Hz
230 mm
1¼ " UNC
I
IP 20
12.4 kg approximately
EN 55014 and EN 61000
Load Speed
-1
390 min 270 min
-1
1040 min 700 min
-1
1700 min 1250 min
16
230 V ~
2500 W
13,5 A
max.
Drilling Diameter
-1
230 mm
-1
100 mm
-1
60 mm