Network Setup - Abus RWM450 Bedienungs-, Installations- Und Wartungsanleitung

Beep 1 x
LED
1 second
Signal: short yellow pulse (lights
only very briefly)
Meaning: Testing in progress,
please wait!
LED 1 x red
Meaning: No other RISA yet found as
this is the first one to be
started up. Once the red
LED goes out, continue as
follows to network other
units to this RISA:

Network setup

Setting up other RISAs; Connection
Mode and creating a Radio Group
• When setting up the network always
ensure to link each additional alarm
to the master.
• Set up each additional RISA in a posi-
tion close to its final installation position
Downloaded from www.Manualslib.com manuals search engine
On the master already set up:
1. Press black activation pin into marked
opening and hold until LED lights
yellow
2. Pull back activation pin, then:
LED
1 second
Signal:
Meaning:
LED
Signal:
Meaning:
– 42 –
short yellow pulse (lights
only very briefly)
Testing in progress,
please wait!
3 seconds
green steady signal
Master function is now on