Technical Data - Electrolux GT200N10 Benutzerinformation

50 electrolux
Problem
It is too cold inside the
freezer
The appliance does not
work at all.
As much as the advice does not lead to result, call the nearest brand-mark service.
Replacing the bulb
If it becomes necessary to replace the lamp:
• break the circuit of the appliance
• remove the lamp cover with a screwdriv-
er as shown in the graphic
• replace the bulb with one of the same
power and specifically designed for house-
hold appliances. (the maximum power is
shown on the light diffuser)
• replace the lamp cover and reconnect
the appliance

TECHNICAL DATA

Volume (gross) Litre
Volume (net) Litre
Height mm
Width mm
Depth mm
Weight Kg
Rising Time hours
Energy Consump- kWh/24h
tion
Freezing Capacity kg/24h
Rated Power Watt
Voltage Volts
Climatic Class
Possible cause
Products to be frozen are
placed too closely to each other
The temperature is not set cor-
rectly
Plug is not connected to the
mains socket properly
Power does not reach the appli-
ance
The appliance is not switched on Switch on the appliance
There is no voltage in the mains
socket (try to connect another
appliance into it)
GT200N10
203
200
876
1201
665
57
43
0,658
13
193
230
SN-T
Place the products in a way so
that cold air could circulate
among them
Set a warmer temperature
Connect the mains plug properly
Try connecting another electrical
device to the power outlet
Call an electrician
Warning! Do not operate the freezer if
the lamp cover is damaged or missing.
GT230N10
234
230
876
1336
665
63
49
0,707
15
193
230
SN-T
Solution
GT300N10
305
300
876
1611
665
69
52
0,825
17
200
230
SN-T