Electrolux GT200N10 Benutzerinformation Seite 44

44 electrolux
Switching off
The appliance is shut off by pressing key (A)
for more than 1 second.
During this, a countdown of the tempera-
ture from -3 -2 -1 will be shown.
Warning! Do not place any object on
the control panel as it may accidentally
switch off the freezer.
For a prolonged life of the appliance do
not switch the freezer on and off within
10 minutes.
Temperature regulation
The freezer is provided with the symbol
which means that it is suitable
for freezing fresh food and for long term stor-
age of frozen and deep-frozen food. The
temperature may be regulated between
-15°C and -24°C. We suggest setting the in-
ternal temperature of approximately -18°C,
which guarantees proper freezing and con-
servation of the frozen foods.
The temperature may be regulated by press-
ing the key (B).
By pressing the key (B) the current tempera-
ture setting flashes on the indicator and by
pressing the key (B) again it is possible to
change it.
You confirm the choice of the temperature
by pressing the key (E). The temperature in-
dicator shows the set temperature.
The set temperature will be reached within
24 hours.
Fluctuations of some degrees around set
temperature are normal and does not mean
any fault in the appliance.
After a long period out of use it is not neces-
sary to set again the temperature because
it remains stored.
Functions Menu
By activating the key (D) the functions menu
is operating. Each function could be con-
firmed by pressing button (E). If there is no
confirmation after some seconds the dis-
play will go out from the menu and return in
normal condition. The following functions
are indicated:
Excessive temperature alarm
Child Lock function
Eco Mode function
Action Freeze function
Drinks Chill function
Excessive temperature alarm
An increase in the temperature in a compart-
ment (for example due to an power failure)
is indicated by:
• flashing the alarm and freezer tempera-
ture indicators
• sounding of buzzer
To reset the alarm:
1. Press key (E).
2. The buzzer switches off.
3. The highest temperature reached in the
compartment appears on indicator
for some seconds. Then it shows again
the set temperature.
4. The alarm indicator continue to flash un-
til the normal conditions are restored.
Possible causes of alarm:
• Large volume of fresh food was inserted.
• The lid has been left open for a long time.
• Any other defect of the system. See the
table in "Troubleshooting".
Child Lock Function
The Child Lock function is activated by
pressing key (D) (several times if necessary)
until the corresponding icon appears
You must confirm the choice by pressing
key (E) within few seconds. You will hear
the buzzer and the icon remains lighted. In
this condition any possible operation
through the keys does not cause any
change as long as this function is activated.
It is possible to de-activate the function at
any time by pressing key (D) until the corre-
sponding icon will flash and then key (E).
.