Control Panel - Electrolux GT200N10 Benutzerinformation

Environment Protection
This appliance does not contain gasses
which could damage the ozone layer,
in either its refrigerant circuit or insula-
tion materials. The appliance shall not
be discarded together with the urban re-
fuse and rubbish. The insulation foam
contains flammable gases: the appli-

CONTROL PANEL

A - Appliance button ON/OFF
B - Temperature regulation button
C - Temperature and function indicator
Display
Excessive temperature alarm
If on the appliance is on and if flash-
es faster the Action Freeze function
is on
Negative Temperature indicator
Temperature indicator
Switching on
After plugging the plug into the power out-
let, if the display is not illuminated, press
key (A), appliance on.
As soon as the appliance is turned on, it is
in alarm condition, the temperature flashes
and you will hear a buzzer.
Press key (E) and the buzzer will go off (also
see the section on "Excessive temperature
alarm" ) the icon
indicator will appear the warmest tem-
perature reached.
A B
still flashes and on the
ance shall be disposed according to
the applicable regulations to obtain
from your local authorities. Avoid dam-
aging the cooling unit, especially at the
rear near the heat exchanger. The ma-
terials used on this appliance marked
by the symbol
C D E
D - Function button
E - Confirmation button
If on the function timer is on
If on the Child Lock function is on
If on the Action Freeze function is on
If on the Drinks Chill function is on
If on the Eco Mode function is on
For a correct storage of the food select the
Eco Mode function that guarantee the fol-
lowing temperature is set:
-18°C in the freezer
• Wait until the inside compartment temper-
ature reach -18°C, before introducing the
goods in the freezer compartment.
• To select a different temperature see
"Temperature regulation".
electrolux 43
are recyclable.