Replacing The "Intenza+" Water Fi Lter - Philips Saeco Energica HD8851 Handbuch

ENGLISH
18
INSERT FILTER.
FILL THE TANK
OK
INSERT WATER SPOUT
OK
PLACE A CONTAINER
UNDER THE
WATER SPOUT
OK
ACTIVATE FILTER
Downloaded from www.Manualslib.com
12 Press the"
and fi lled the water tank.
13
The machine reminds you to install the hot water dispenser. Check that
it is correctly installed. Press"
14
Press the"
hot water dispenser.
15
The machine starts dispensing water. This page will be displayed. Once
the machines stop dispensing, remove the container.

Replacing the "INTENZA+" water fi lter

When the "INTENZA+" water fi lter needs to be replaced with a new one,
this icon is displayed
1 Replace the fi lter as described in the previous chapter.
2
The machine is now programmed to manage a new fi lter.
Note:
If the fi lter is already installed and you want to remove - but not replace it,
select the "ENABLE FILTER" option and set it to OFF.
If there is no "INTENZA+" water fi lter installed, insert the small white fi lter
previously removed into the water tank.
manuals search engine
" button to confi rm that you have inserted the water fi lter
" to confi rm.
" button to confi rm that a container is placed under the
.