Pelgrim GKT814 Anleitung Seite 82

OPERATION
GB 10
• The set switch-off time can be seen in the timer display for each
burner (after the correct burner has been selected).
• When the time has elapsed, the burner switches off and you will
hear a beep several times for a period of 30 seconds.
Setting the burner switch-off time
(GKT875RVSA/GKT895RVSA/GKT814RVSA)
• Switch on the hob, ignite a burner and set the heating level.
• Press the timer button.
An indicator above the timer button will start flashing to indicate for
which burner the switch-off time is set. You can also select another
burner using the timer button if several burners are ignited. 't0.00'
appears in the display to indicate that no time has yet been set for
the selected burner.
• Press the + button on the timer to set the time for the selected
burner. This changes in increments of one minute.
• Then press the timer button again when you have finished setting
the time.
Above the timer button the indicator lights of burners that are linked
to a timer will remain illuminated.
• While programming you can set the time to '0.00' by simultaneously
pressing the + and - button of the timer.
• You can view the remaining time for each burner by pressing the
timer button again. The time of the burner whose indicator light is
flashing, appears in the display. If you want to view the remaining
time for a different burner, then you need to press the timer button
again to select this burner.
• You can adjust the time by pressing the timer button, selecting the
correct burner with the timer button and then pressing the + and -
button of the timer to adjust the time.
• If you switch off the burner manually, the set switch-off time
disappears.
Setting the burner switch-off time
(GKT832RVSA/GKT831RVSA)
• Switch on the hob, ignite a burner and set the heating level.
• Press the timer button.