24
2.
AC functions
2.1
Standard AC function
2.1.1
Function description
The system enables allocation to room/time zones as well as the recording of locking times and
key numbers.
Alarm contacts:
A bolt switching contact, a opening contact and a passive glass breakage sensor can be
connected to monitor the door.
AC function:
In a disarmed state, it is possible to release a door locked by a door strike via the reader and/or
a button (AC function).
Applicable door strikes: fail secure door strike or fail safe door strike.
Application-related data (e.g. key numbers, authorization (date/time) etc.) are programmed directly
via the intrusion control panel.
Code carrier and time zones are managed at the control panel.
2.1.2
Planning example
BUS-2
Passive glass
breakage sensor
Mounting and Connection Instructions Door controller module for MB
4
Door controller module
F
I
1
2
3
4
5
6
7
8
9
3
r
0
e.g. IK3
reader
Door strike and
monitoring contact
BUS-2
Door release
button
Door strike
Bolt switching
contact
Opening
contact