hanseatic HGS17060EW Gebrauchsanleitung Seite 38

Setting up the freezer
12. Remove the bottom hinge plate 11 as well as the mounting
plate 12 and the screw 13.
13. Place the hinge pin, including the nuts and spring washer,
into the hole of the hinge plate on the opposite side 11.
14. Screw the hinge plate 11 tightly back onto the opposite side.
15. Flip over the mounting plate 12 and attach it and the screws
13 onto the opposite side of the freezer.
16. Lift the door back onto the hinge pin and hold it in place so
that it remains open.
17. Screw the upper hinge plate tightly back onto the opposite
side so that the hinge pin is in the door's hinge bushing.
18. Reattach the temperature controller 1 if it fell out while
changing the hinges.
You have successfully changed the door hinges.
EN-12
13
11
12
11
12
HGS17060EW, HGS17060ES