Fill Water Tank - Jura IMPRESSA XJ5 Professional Bedienungsanleitung

Cleaning the bean
container
Downloaded from www.Manualslib.com
c T Press the Maintenance button.
c T Press the Maintenance button.
E If the descaling operation stops unexpectedly, rinse the water
Coffee beans may be covered with a slight oil film which remains on
the walls of the bean container. These traces may negatively affect
the coffee result. For this reason clean the bean container from time
to time.
Precondition:
Q T Switch the machine off with the On/Off button.
3 T Switch the machine off at the power switch.
manuals search engine
T Place a receptacle under the hot-water nozzle.
, water flows straight into the drip tray and
DE-SCALING
out of the hot-water nozzle repeatedly.
The operation is interrupted,
T Empty the receptacle.
T Empty the drip tray and coffee grounds container and put
them back into the machine.

FILL WATER TANK

T Remove the water tank and rinse it thoroughly.
T Fill the water tank with fresh, cold water and reinsert the
tank.
and the Maintenance button c lights up.
PRESS RINSE
T Place one receptacle under the hot-water nozzle and another
under the coffee spout.
, water flows out of the hot-water nozzle
DE-SCALING
and the coffee spout.
The operation stops automatically,
T Empty the drip tray and coffee grounds container and put
them back into the machine.
Descaling is now complete. Your IMPRESSA is once more
ready for use.
tank thoroughly.
is displayed.
READY
T Remove the aroma preservation cover.
T Clean the bean container with a soft, dry cloth.
T Fill the bean container with coffee beans and close the
aroma preservation cover.
Maintenance
.
EMPTY TRAY
.
EMPTY TRAY