Jura IMPRESSA XJ5 Professional Bedienungsanleitung Seite 22

Permanent settings in programming mode
Setting the water
hardness
Energy-saving mode
Downloaded from www.Manualslib.com
E If you are using the CLARIS Pro Blue filter cartridge and have
The harder the water is, the more frequently the IMPRESSA needs to
be descaled. It is therefore important to set the water hardness accu-
rately.
The water hardness can be adjusted on a continuous scale between
° dH and
Example: Proceed as follows to change the water hardness from
16°dH
Precondition:
k T Press and hold the Rotary Switch until
g T Turn the Rotary Switch until the programme item
k T Press the Rotary Switch.
g T Turn the Rotary Switch until
k T Press the Rotary Switch.
g T Turn the Rotary Switch until
k T Press the Rotary Switch to exit programming mode.
In the programme item
energy-saving mode (Energy Save Mode, E.S.M.
U
U
manuals search engine
activated it, it is not possible to set the water hardness.
° dH.
to .
25°dH
is displayed.
READY
RINSE
is displayed.
HARDNESS
16°dH
appears briefly on the display.
OK
HARDNESS
READY
ENERGY
SAVE w
U
Soon after the last preparation, the IMPRESSA stops heating
up. After about minutes the message
played.
U
Before you can prepare a speciality coffee, hot water or
steam, the machine must heat up.
SAVE -
U
All speciality coffees as well as hot water and steam can be
prepared without having to wait.
appears.
RINSE
is displayed.
25°dH
is displayed.
EXIT
you can permanently set an
):
©
ENERGY ON
is dis-