Jura IMPRESSA XJ5 Professional Bedienungsanleitung Seite 32

Maintenance
Changing the filter
Downloaded from www.Manualslib.com
E After
E After two months, the filter will cease to work. Set the date on
E If the CLARIS Pro Blue filter cartridge is not activated in pro-
E CLARIS filter cartridges are available from specialised dealers.
Precondition:
nance button c lights up.
c T Press the Maintenance button.
E After two months, the filter will cease to work. Set the date on
c T Press the Maintenance button.
E You can interrupt rinsing of the filter at any time by pressing
E The water may be slightly discoloured. This is not harmful to
manuals search engine
litres of water have flowed through, the filter will
cease to work. Your IMPRESSA will automatically prompt you
to change the filter.
the date plate on the filter holder in the water tank.
gramming mode, you will not be prompted to change the fil-
ter.
/
READY FILTER
/
FILTER CHANGE
T Remove and empty the water tank.
T Open the filter holder and remove the old CLARIS Pro Blue
filter cartridge.
T Insert the new filter cartridge into the water tank, exerting
slight pressure.
T Close the filter holder. It will click into place audibly.
the date plate on the filter holder in the water tank.
T Fill the water tank with fresh, cold water and reinsert the
tank.
T Place a receptacle under the hot-water nozzle.
FILTER RINSING
nozzle.
the Maintenance button c. Press the Maintenance button c
again to continue rinsing of the filter.
health and does not affect the taste.
Rinsing of the filter stops automatically. The machine heats
up.
READY
Your IMPRESSA is once more ready for use.
is displayed and the Mainte-
, water flows out of the hot-water