Jura IMPRESSA XJ5 Professional Bedienungsanleitung Seite 23

Automatic switch-off
Downloaded from www.Manualslib.com
Example: Proceed as follows to change the energy-saving mode
from
Precondition:
k T Press and hold the Rotary Switch until
g T Turn the Rotary Switch until the programme item
k T Press the Rotary Switch.
g T Turn the Rotary Switch until
k T Press the Rotary Switch.
g T Turn the Rotary Switch until
k T Press the Rotary Switch to exit programming mode.
By instructing your IMPRESSA to automatically switch itself off, you
can cut down your energy consumption. If this function is activated,
your IMPRESSA switches off automatically after the preset time fol-
lowing the last action on the machine.
You can set the automatic switch-off time to
hours.
Example: Proceed as follows to change the automatic switch-off
from
Precondition:
k T Press and hold the Rotary Switch until
g T Turn the Rotary Switch until the programme item
k T Press the Rotary Switch.
g T Turn the Rotary Switch until
k T Press the Rotary Switch.
g T Turn the Rotary Switch until
k T Press the Rotary Switch to exit programming mode.
manuals search engine
to .
SAVE - SAVE w
is displayed.
READY
RINSE
is displayed.
-
SAVE -
appears briefly on the display.
OK
ENERGY w
READY
to .
5 HRS 1 HRS
is displayed.
READY
RINSE
is displayed.
AFTER
5 HRS
appears briefly on the display.
OK
OFF AFTER
READY
Permanent settings in programming mode
appears.
RINSE
ENERGY
is displayed.
SAVE w
is displayed.
EXIT
minutes or . –
appears.
RINSE
is displayed.
1 HRS
is displayed.
EXIT
OFF