Jura IMPRESSA XJ5 Professional Bedienungsanleitung Seite 21

Product
Steam
Downloaded from www.Manualslib.com
Temperature
–
Example: Proceed as follows to change the coffee strength for one
espresso from
from
Precondition:
k T Press and hold the Rotary Switch until
g T Turn the Rotary Switch until the programme item
k T Press the Rotary Switch.
E Next select the button of the product for which you would like
i T Press the espresso button.
k T Press the Rotary Switch.
g T Turn the Rotary Switch until
k T Press the Rotary Switch.
g T Turn the Rotary Switch until
k T Press the Rotary Switch.
g T Turn the Rotary Switch until
k T Press the Rotary Switch.
g T Turn the Rotary Switch until
k T Press the Rotary Switch to exit the programme item.
g T Turn the Rotary Switch until
k T Press the Rotary Switch to exit programming mode.
manuals search engine
Coffee strength
–
to
STRONG
to .
45 ML 40 ML
is displayed.
READY
RINSE
is displayed.
BUTTONS
SELECT BUTTON
to make settings. No product is prepared at this point.
WATER
45 ML
appears briefly on the display.
OK
WATER
STRONG
appears briefly on the display.
OK
STRENGTH
BUTTONS
READY
Permanent settings in programming mode
Amount
Amount of steam:
–
3 SEC 120 SEC
and the amount of water
NORMAL
RINSE
is displayed.
40 ML
is displayed.
STRENGTH
is displayed.
NORMAL
is displayed.
EXIT
is displayed.
EXIT
appears.