Refsta 7516 Bedienungsanleitung Seite 7

INSTRUCTIONS FOR THE INSTALLATION, MAINTENANCE AND USE OF THE HOOD
WARNING
Do not operate without fulling understand all of the information reported in the manual; in case of doubts always
request the presence of a service technician.
THE MANUFACTURING COMPANY reserves the right to modify specifics and functional and/or technical
characteristics of the machine in any moment without without notice.
THE PRESENT MANUAL IS THE PROPERTY OF THE MANUFACTURING
COMPANY, AND ANY REPRODUCTION, EVEN PARTIAL, IS PROHIBITED, WITHOUT ITS AUTHORIZATION.
SYMBOLS USED IN THE PRESENT MANUAL
INDICATION: Indications pertaining to the correct
ATTENTION: Point in which a note of particular
DANGER: An important note of behavior for the
INTRODUCTION
1.1
PURPOSE AND CONTENT OF THE MANUAL
The purpose of the manual is to allow the user,
but above all the operator that will have to use the hood, to take those precautions and arrange all the
procedures necessary for a correct, safe and long-lasting use.
This manual contains all the information necessary for the installation, assembly, use and maintenance of the hoods.
The scrupulous compliance of that which is described within guarantees a high degree of security and productivity
of the equipment.
1.2
MANUAL PRESERVATION AND CONSULTATION
The manual must be preserved with care by the user in a safe dry place and must always be available for
consultation, both by the operator and by technicians.
The Use and Maintenance Instruction manual is an integral part of the equipment and must be preserved for future
references until its final dismantling.
1.3
MANUAL UPDATE
The present manual reflects, at the moment of market introduction, a state-of-the-art appliance.
Possible modifications, adjustments or applications of new technologies on newly-marketed products do not force
THE MANUFACTURER to consider the appliances already present on the market, with the relative technical
documentation, deficient or inadequate.
1.4
GENERAL
Information
In case of exchange of information with the Constructor of the equipment refer to the series number and to
identification data
Responsibility
With the consignment of the present manual THE MANUFACTURER declines all responsibility, civil or
penal, for accidents caused by the partial or total non-compliance with specifications contained within.
THE MANUFACTURER declines, all responsibility resulting from:
- the improper or incorrect use of the equipment by the customer
- unauthorized modifications and/or repairs
- the use of unoriginal spare parts or those not specifc for this hood model.
use of the hood.
relevance is expressed.
prevention of injuries or material
damage is expressed.
7