Safety System; Switching Off A Burner; Power Levels - Siemens ER626PB90E Gebrauchsanweisung

Safety system

Thermocouple

Switching off a burner

Power levels

Setting
High
flame
Low
flame
Downloaded from www.Manualslib.com
Depending on the model, your hob may have a safety
system (thermocouple) that prevents the flow of gas if the
burners accidentally switch off. To ensure that this device
is active, switch on the burner as usual and, without
releasing the control knob, press and hold it down firmly
for 4 seconds after lighting the flame.
Ignition
sparker
Turn the corresponding control knob clockwise to the 0
setting.
Los mandos progresivos le permiten regular la potencia
que necesite entre los niveles máximo y mínimo.
Control knob
off
Maximum
capacity or
aperture and
electricity
on
Minimum
capacity or
aperture
For dual double-flame burners, the inner and outer
flames can be controlled separately.
The available power levels are as follows:
Inner and outer flame on full power.
Outer flame on minimum, inner flame on full power.
Inner flame on full power.
manuals search engine
9