BIOS-Einstellungen
6.3.14
SATA And RST Configuration
Aptio Setup Utility - Copyright (C) 2020 American Megatrends, Inc.
Advanced
┌─────────────────────────────────────────────────────────────────┬────────────────────────────────┐
│ SATA And RST Configuration │Enable/Disable SATA Device. │
│ │ │
│ SATA Controller(s) [Enabled] │ │
│ SATA Mode Selection [Intel RST Premium] │ │
│ With Intel Optane │ │
│ System Acceleration] │ │
│ SATA Interrupt Selection [Msix] │ │
│ SATA Test Mode [Disabled] │ │
│ RAID Device ID [Client] │ │
│> Software Feature Mask Configuration │ │
│ Aggressive LPM Support [Disabled] │ │
│ │ │
│ Serial ATA Port 0 ─ 5 Empty │ │
│ Software Preserve Unknown │ │
│ Port 0 [Enabled] │ │
│ Hot Plug [Disabled] │ │
│ Configured as eSATA Hot Plug supported ├────────────────────────────────┤
│ External [Disabled] │→←: Select Screen │
│ Spin Up Device [Disabled] │↑↓: Select Item │
│ SATA Device Type [Hard Disk Drive] │Enter: Select │
│ SATA Port 0 DevSlp [Disabled] │+/─: Change Opt. │
│ DITO Configuration [Disabled] │F1: General Help │
│ │F2: Previous Values │
│ │F3: Optimized Defaults │
│ │F4: Save & Reset │
│ │ESC: Exit │
│ │ │
└─────────────────────────────────────────────────────────────────┴────────────────────────────────┘
Version 2.20.1275. Copyright (C) 2020 American Megatrends, Inc.
CB1067
Version: 1.0
65