Filling The Filling Chamber Using The Filling Aid - STORZ & BICKEL Mighty Gebrauchsanweisung

8 . F I L L I N G T H E F I L L I N G C H A M B E R
8.2. Filling the Filling Chamber using
the Filling Aid
Remove the Cooling Unit from the Va-
porizer and remove any residues that
may be in the Filling Chamber. The
Filling Chamber Tool can be a help in
doing this.
Remove the lower cap of the Filling Aid
by turning counterclockwise. Place the
Filling Aid on the Vaporizer and attach
by turning it clockwise. Remove the
upper cap from the Filling Aid. Pull the
plug and use it to fill a portion of plant
material through the central opening
into the Filling Chamber.
Make sure that the Filling
Chamber is not overfilled (see
Chapter 8. "Filling the Filling
Chamber", page 53).
Fill the Filling Aid to the lower rim
(see the two following drawings)!
Overfilling leads to clogging of the
Screens and can make inhaling more
difficult.
Filling the Filling Chamber with the Filling Aid
The lower rim of the Filling Aid must be above
the top level of the plant material
Then re-insert the plug into the central
opening and screw on the upper cap of
the Filling Aid.
Unscrew the Filling Aid with a 90° rota-
tion and screw on the lower cap again.
Then re-mount the Cooling Unit by ro-
tating it clockwise through 90°.
55