Factors Influencing Vaporization; The Mighty Vaporizer; Unpacking - STORZ & BICKEL Mighty Gebrauchsanweisung

5 . FA C T O R S I N F L U E N C I N G VA P O R I Z AT I O N
The amount of aromas and fragrances
released can be influenced by the fol-
lowing factors:
1. Quality: The amount of aroma or
fragrance contained in the respec-
tive plant material that can be va-
porized.
2. Quantity: The amount of vaporiza-
tion material in the Filling Chamber.
3. Surface: The finer the plant is
ground, the greater the surface and
the more aromas and fragrances
can be released during the vapori-
zation cycle.
4. Temperature: The higher the tem-
peratures, the more aromas and
fragrances will be released at once.
Please note: Increasing the tempera-

6.1. Unpacking

The box contains all components as
well as the Instructions for Use. Keep
the Instructions for Use for future ref-
erence.
Remove the Vaporizer and the acces-
sories from the box. Immediately after
unpacking, check whether the Vapor-
izer, the accessories, the power adapt-
er and the device plug are all included
in the delivery and work properly. If
you notice any defects, inform the
seller or the delivery agent immedi-
ately.
6 . T H E M I G H T Y VA P O R I Z E R
ture should be the last resort, because
plant material tastes more roasted
when using higher temperature.
Since the plant ingredients are re-
leased in a gentle manner, the vapori-
zation cycle may be repeated with the
same contents in the Filling Chamber.
Depending on the four factors de-
scribed above, the Filling Chamber
contents may be reused multiple times
until the aromas and fragrances are
released completely.
If no more vapor is produced at the
highest temperature, then the vapori-
zation material is completely exhaust-
ed and must be replaced with new ma-
terial. However, for the best aroma
results it is advisable to replace the
vaporization material before this point.
The packing material (plastic
bags, boxes etc.) must be kept
out of the reach of children as
it is a potential source of danger.
Please dispose of the packing mate-
rial in a proper and environmentally
friendly manner.
We recommend keeping the original
packaging in case it is required later
(transport, Storz & Bickel Service Cent-
er etc.).
46