Advanced Settings; Storm Control; Tabelle 76: Cli "Storm Control" Configuration - WAGO 852-1816 Handbuch

Industrial-Managed-Switches
852-1816 Lean-Managed.Switch
10.2.3

Advanced Settings

10.2.3.1

Storm Control

Tabelle 76: CLI "Storm Control" Configuration

Node
enable
configure
configure
Example
L2SWITCH#configure terminal
L2SWITCH(config)#storm-control rate 1 type broadcast ports 1-6
L2SWITCH(config)#storm-control rate 1 type multicast ports 1-6
L2SWITCH(config)#storm-control rate 1 type DLF ports 1-6
Command
show storm-control
storm-control rate
RATE_LIMIT type (bcast |
mcast | DLF | bcast+mcast
| bcast+DLF | mcast+DLF |
bcast+mcast+DLF) ports
PORTLISTS
no storm-control type
(bcast | mcast | DLF |
bcast+mcast | bcast+DLF |
mcast+DLF |
bcast+mcast+DLF) ports
PORTLISTS
Description
This command displays the current "Storm Control"
configurations.
This command enables bandwidth limitation for
broadcast, multicast or DLF packets and sets it for a
specified type.
This command disables bandwidth limitation for
broadcast, multicast or DLF packets.
Anhang 177
Handbuch
Version 1.0.0