Vlan; 10.2.3.2.1 Port Isolation; Tabelle 77: Cli "Port Isolation" Configuration - WAGO 852-1816 Handbuch

178 Anhang
10.2.3.2

VLAN

10.2.3.2.1 Port Isolation

Tabelle 77: CLI "Port Isolation" Configuration

Node
enable
interface
interface
Example
L2SWITCH(config)#interface 1/0/2
L2SWITCH(config-if)#port-isolation ports 3-10
Handbuch
Version 1.0.0
Command
show port-isolation
port-isolation ports
PORTLISTS
no port-isolation
Industrial-Managed-Switches
852-1816 Lean-Managed.Switch
Description
This command displays the current "Port Isolation"
configurations.
"V" indicates that the port's packets can be sent to
this port.
"-" indicates that the port's packets cannot be sent to
this port.
This command configures a port or port range to
forward data packets from a specific port.
This command configures all ports to forward data
packets from a specific port.