180 Anhang
10.2.3.3
LLDP
Tabelle 79: CLI "LLDP" Configuration
Node
enable
enable
configure
configure
interface
Handbuch
Version 1.0.0
Command
show lldp
show lldp neighbor
lldp (disable | enable)
lldp tx-hold <2-100>
lldp tx-interval <1-3600>
Industrial-Managed-Switches
852-1816 Lean-Managed.Switch
Description
This command displays the LLDP configurations.
This command displays all information of port
neighbors.
This command globally enables/disables the LLDP
function on the switch.
This command configures the "tx-Hold Time" that
determines the TTL of the switch message (TTL = tx-
hold * tx-interval).
This command configures the interval to transmit the
LLDP packets.