Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
6. Pull the chopped log apart until it breaks. Fig. 8.
Fig. 8
How to release a jammed log?
1. Move the log ram backward and arrest it on the magnet.
2. Place a triangular wooden chock under the log, then move
the log ram forward so that it pushes the chock under the
jammed log.
3. If the log is not released, keep repeating this procedure,
using larger chocks, until the log is released.
Never use a hammer to release a jammed log, and keep
your hands away from the log.
Do not enlist the aid of a second person - this is a one-
man job. Do not try to release the log by using a hammer,
since this may break the material.
Finishing work:
Attend to that the log ram has gone back to its basic
position.
Follow the care and maintenance instructions.
C
a
r
e
a
n
d
m
C
a
r
e
a
n
d
m
Wear protective gloves in order to avoid injury to the
hands.
Observe the following in order to keep the log splitter in
good working order:
Clean the machine thoroughly after you have finished
using it.
Remove any resin remains on the machine.
Sharpening the splitting wedge
After extended periods of use, or if the splitting performance is
reduced, sharpen the splitting wedge with a file (and remove
any burrs). Fig. 9
All manuals and user guides at all-guides.com
a
i
n
t
e
n
a
n
c
e
a
i
n
t
e
n
a
n
c
e
Sharpen splitting wedge
Fig. 9
T
T
r
r
a
a
n
n
s
s
p
Secure the machine with the transport locking pin and
plug the plastic cover over the blade guard for each transport /
storage.
Never transport the machine on the blade guard.
G
G
• The machine is guaranteed for a period of 2 years from the
date of purchase/delivery against faults due to material or
manufacturing errors.
• The guarantee is rendered invalid in the event of any
damage caused due to improper use or handling, improper
packaging when returning the machine or failure to
observe the operating instructions.
• Faulty parts must be returned to our works carriage-paid.
The decision on free replacement of faulty parts will be
made at our discretion.
• The guarantee does not cover normal wear and tear to the
splitting wedge.
• Any guarantee work will be carried out by the
manufacturer. Our express approval must be obtained
before having any such work carried out by another
company.
• The guarantee only remains valid provided that original
replacement parts are used.
• We reserve the right to make technical changes in the
course of technical progress.
12
p
o
o
r
r
t
t
/
/
S
S
t
t
o
o
r
r
a
a
g
g
e
e
u
a
r
a
n
t
e
e
u
a
r
a
n
t
e
e
Werbung
Kapitel
Inhaltsverzeichnis
