Kemppi FLEXLITE TX Betriebsanleitung Seite 14

2. Connect the coolant inlet and outlet hoses to the cooling unit. Note that the connectors are color-coded.
Make sure to connect the coolant hoses to the correct hose connectors. If the connections cross, the torch and torch
body may overheat.
Connectors in TIG torch (K5 level)
1. Welding cable connector
2. Control cable connector
3. Coolant hose connector
4. Coolant hose connector
© Kemppi
15
Flexlite TX
Operating manual - EN
1920910 / 2039