SPORTSTECH F48 Benutzerhandbuch Seite 68

5. Can recieve WIFI signal but can´t connect to the internet.
a. Generally, there is no automatic-allocation of IP, you can mannually allocate IP address:
b. Static IP settings are as follows:
1. Click „Settings" on the home screen to enter into the Settings, as below:
2. Click the network name to be connected, the
following box pops up:
3. Input correct network password in the dialog-
4. Long press the name of intemet to be connec-
ted until the following dialogue shows.
5. Click the „Static IP" in the above dialogue box
Input your IP address and network mask in the IP address column (if you have no idea about your
IP address and network mask, check your phone and computer for IP address and network mask)
Click „Save" after correctl input.
box, click „Connect" then you will
see the window as below.
and the following dialogue box will show.
6. Slide the
on the above window to show
the dialogue box as below.
68