Matters Needing Attention; Fault Analysis And Handling - SPORTSTECH F48 Benutzerhandbuch

i
This product is not available for download and installation function other than the au-
tomatic update of resources provided by our company , Due to the need for product
improvement, product design may be carried out without prior notice.

13. MATTERS NEEDING ATTENTION

1. Power socket with ground line must be used for your safety when you use the treadmill.
2. Before exercise, please check whether the power supply load, and check the safety lock is valid.
3. if an abnormal situation happen during the running process, pull off safety clip. If non professional
people, do not attempt to remove or repair the safety lock, it will be quickly slow down to stop running
to avoid damage the equipment.
4. If you have any questions regarding this products, please contact the dealer.

14. FAULT ANALYSIS AND HANDLING

Fault code
E01
E05
E08
E09
E0A
E0B
E0C
Cause
Poor communication
Overcurrent protection
Overvoltage protection
Overload protection
Wiring connection error
Failure of ascension
Overheat protection
No display
No heart rate display
No touchscreen function
69
Solution
Check the main communication lines in the
right column. If the connection is OK, try
replacing the console or the PCB.
Check the engine if it is ok. Reset system
data or change engine.
Check the voltage
Check the weight of the user, or lubricate the
treadmill.
Check wiring
Check the line connection between the
ascension motor and the circuit board, or
change the ascension motor if it is defective.
Check the display when it is too hot. Turn the
power off for a while.
Check the power cord and the power switch.
Check the connection of the main cables.
Check the circuit board connection.
Check the wires connection of the heart rate
sensor. Keep hands moist and keep heart
rate sensor tighter.
Keep the display and the hands dry.