Basic Operations; Setting The Code For Preset Audio And Visual Components; Setting A Component Code - Sony rm-vl900t Bedienungsanleitung

Basic Operations

Setting the Code for
Preset Audio and
Visual Components
The Commander is preset at the
factory to operate Sony brand AV
components (see the table below).
If you are using the Commander
with a factory-set Sony
components, skip the following
procedures.
You can use the Commander with
other preset AV components also.
To use with other AV components,
you need to follow the procedures
to set the correct codes for each
component.
Component Preset
Select Button component(s)
TV TV
TV/VCR
Combo
VCR VCR
CBL/SAT Satellite
tuner (SAT)
DVD DVD player
(DVD)
CD CD player
MD MD deck
TAPE Cassette
deck*
AMP Amplifier
* Analog audio compact cassette deck
NOTE
CBL and VD can be set to any of the
above Component Select buttons, and
so can the others respectively.
See "Table of Preset Functions" (page
48) for the functions of buttons as for
each component.
GB
8
Factory setting
Sony TV
Sony VHS
VCR
Sony SAT
Sony DVD
player
Sony CD
player
Sony MD deck
Sony cassette
deck
Sony amplifier

Setting a component code

Example: To set up a Philips' TV
1
See the tables in the
supplied "Component
Code Numbers", and find
the three-digit code number
for the desired component.
If more than one code number
is listed, use the number that is
listed first.
For example, to set up a
Philips' TV, you would use the
code number 011.
2
Press S (set).
All Component Select buttons
flash.