Setting A Component Code By The Search Function - Sony rm-vl900t Bedienungsanleitung

Setting a component code
by the Search function
You can find a code number
available for a component that
doesn't have one in the supplied
"Component Code Numbers".
Before starting the Search
function
Set each component to the
following status so that the Search
function works effectively.
TV: Power-on
VCR, SAT, CBL, DVD, AMP:
Power-off
VD, CD, MD, TAPE: Power-on
with a playback source (disc,
cassette tape, etc.)
1
Press S (set).
All Component Select buttons
flash.
2
Press the Component Select
button for the desired
component.
The selected Component
button lights up, and all other
buttons turn off.
3
Press PROGR + or PROGR
– and 1 in turn until the
component reacts as
decribed in the following.
Powers off: TV
Powers on: VCR, SAT, CBL,
DVD, AMP
Plays back: VD, CD, MD, TAPE
Press PROGR + to go to the
next code number.
Press PROGR – to go back to
the previous code number.
The Component button flashes
three times after the numbers
have turned one cycle.
Note
Always be sure to first press
PROGR +/– before pressing 1.
Otherwise the Search function does
not work properly.
Continued
GB
11