Appendix; Table Of Preset Functions - Sony rm-vl900t Bedienungsanleitung

Appendix

Table of Preset
Functions
Note
There may be some components or
functions that cannot be operated with
this Commander.
TV
KEY DISPLAY FUNCTION
01 To turn the power on/
off
11 – 9, 0 To change the
programme
Also to turn on
3t To change the input
mode.
4/ To switch to teletext
qsa To turn on.
To return from teletext
to TV.
7MENU To call up the MENU
display.
GB
48
KEY DISPLAY FUNCTION
6v To move the cursor
upward.
6V To move the cursor
downward.
6B To move the cursor to
the right.
6b To move the cursor to
the left.
6OK To enter the selection of
the MENU display.
qa2- To select a number
between 20 and 29
21-, - To select doble-digit
numbers.
Works in the same way
as the TV's commander.
5 Fastext buttons
(RED)
(GREEN)
(YELLOW)
(BLUE)
qgPROGR +/– Programme up: +
Programme down: –
qh To operate JUMP
function on the TV
depending on the setting
of the TV's
manufacturer.
82 +/– Volume up: +
Volume down: –
9% To mute the volume on
the TV. Press again to
turn muting off.
Using Fastext
With Fastext you can access pages
with one key stroke. When a
Fastext page is broadcast, a colour-
coded menu will appear at the
bottom of the screen. The colours
of this menu correspond to the
red, green, yellow and blue keys
on the Remote Commander.
Press the key which corresponds
to the colour-coded menu. The
page will be displayed after some
seconds.