Audio Output; Hdmi Input - Xoro PTL 1400 Bedienungsanleitung

Connecting additional devices - USB media player

Audio output

External speakers with built-in amplifier (active PC speakers, sound bars, stereo systems, etc.) can be
connected to the audio output.
Note:
You can turn off the TV's built-in speakers in the screen and speaker settings (see Page 17).

HDMI input

The HDMI input (HDMI IN) can be used to connect external devices such as BluRay and DVD players,
PCs, receivers, game consoles, etc. Pressing the INPUT key on the remote control or pressing the
SCREEN/INPUT key on the TV for a long time switches between the HDMI input (HDMI) and the built-
in DVB-T2 receiver (DTV).
Recommended video resolutions
Recommended PC and game
console resolution
Audio format
Note:
• When connecting PCs or game consoles, the "Full" format should be selected instead of "Over-
scan" and sharpness "0" should be selected in the screen and speaker settings (see page 16).
• Video signals in interlaced format can only be displayed with reduced picture quality and are
therefore not recommended.
• 480i (60 Hz) resolution is not supported.
• Compressed or PCM multi-channel audio is not supported. If your HDMI device allows audio
format selection, do not select "RAW", "Bitstream", "BS Out", "Dolby", "dts", "Multi Channel" or
similar.
USB media player
Select the DTV input with the INPUT key (see page 14).
Open the media player with the g key.
The media player allows the playback of the following file
types: music, photo and film.
Use the keys ◄/► to select the desired file type and confirm
your selection with the OK key.
File browser
▲/▼ Select file/folder
OK Open/playback file/folder/full screen playback
►|| Start slide show (only for image files)
BLUE Change view (only for image files)
BACK/MENU Navigation to the parent folder
EXIT Return to the selection screen
480p (60 Hz), 576p (50 Hz), 720p (50/60 Hz),
1080p (24/50/60 Hz)
1920x1080 pixels (60 Hz)
PCM Stereo only
EN 18