Initial Installation - Xoro PTL 1400 Bedienungsanleitung

Initial installation

After sliding the main switch to the ON position, the power LED will first light up green. After a moment,
Please wait followed by the start screen will appear on the screen. When the start process is com-
plete, the installation menu is displayed.
You can use the arrow keys ▲/▼ to switch between the menu items. If a menu item is highlighted in
colour, you can adjust it with the keys ◄/►.
OSD language
Select the language in which the on-screen menus will be
displayed.
Country
Select the country in which you want to operate the televi-
sion.
Antenna Power
If your antenna (e.g. an indoor antenna with amplifier without
its own power supply) must be supplied with power from the
TV via the antenna cable, switch on this function.
Note:
Antenna Power must be switched on for the antenna that is
included in the package.
Channel search
Start the channel search with the OK key. The search
can take several minutes. If the search does not find all
channels, reposition your antenna or use a more efficient
antenna and start the search again (see page 22).
Note:
• The search can take several minutes.
• If the search does not find all channels, reposition your antenna or use a more efficient antenna
and start the search again (see page 22)
• In some countries (e.g. Germany) no DVB-T/T2 radio channels are transmitted.
• After moving to another region, you must run the channel scan again.
EN 13