Simons Voss Technologies CompactReader CL11.080040 Kurzanleitung Seite 30

6. Installation
NOTE
Weakened adhesive surface due to contamination
The bond is weakened by grease or dust.
1. Clean the surface on which you want to mount the CompactReader
2. Do not touch the glued surfaces.
6. Only place the upper edge of the lower shell in the marked position
7. Align the lower shell with the marked position. Use a spirit level if ne-
8. Press the lower bowl flat (approx. 10 seconds).
30 / 124
before gluing.
so that the TOP mark points upwards.
cessary.
CompactReader
EN