Megasat Countryman GPS Professional Benutzerhandbuch Seite 38

17.
Arrange cable holder in front of (30cm apart from) antenna center by facing open side
of cable holder toward projected part of the mounting plate. Then attach friction tape
outside of cable holder
18.
Make 15mm drill hole in the center of
the tape marking.
20.
lace cable holder in the tape marked
and make 3 of 2mm drill holes.
22.
Fix cable holder on the car
roof with 3 of M4x20.
screws
18
6. Mounting instruction
ENGLISH
19.
Insert Receiver & 5c Power cable
through the hole.
21.
Apply silicone around and on the
top of screws.
23.
Apply silicone around and on the top
of screws.