1.
Clean the surface with cleaner.
3.
Attach friction tape outside of the moun-
ting plate by 4mm away from plate edges.
5.
Put back the mounting plate on the sili-
cone applied and make 6holes (2mm) .
7.
Assemble bolts
16
6. Mounting instruction
ENGLISH
2.
Fahrtrichtung
Locate mounting plate in the center of
car roof.
4.
Apply silicone within the guided tape
line but leave 2cm gap from the line.
6.
Apply silicone on the holes.
8.
Re-apply silicone to cover bolts assem-
bled