Functional Description - Megasat Countryman GPS Professional Benutzerhandbuch

A Power On
Function Description
ON OFF
The "Home position" means antenna completely folded down to the body part which is
the basic position for functioning.
B Selecting the satellite
Funktion Description
C Satellit suchen
Funktion Description
2. Operating instruction

Functional Description

Operation
"Power" Switch When the all cable connections are completed,
switch on with the "Power Switch" button on the
top of the controller.
„Home Status" light If the antenna was at home position, "Home status" light
Stand By „ON" will be solid on to show it is ready to use.
„Home Status" If the antenna was not in the home position, "Home status"
light Flashing light will flash, and the antenna will return to the home
position within a maximum 2 minutes. Then will be solid on.
Turning into „ON"
Operation
Once antenna and controller are connected, you can
""Satellite
select & change the satellite as you desire.
CCW / CW button"
Select the preferring satellite using the "CCW / CW"
Light"
buttons, then press the "OK" button to accept the setting.
If you select the wrong satellite, you can re-search target
satellite using the "CCW / CW" button, then press the "OK"
"OK" button
button to accept the new setting.
Operation
After the satellite selection, "Home Status" light will go off
and the LED light of the selected satellite will start flashing.
"Satellite" light
Once selected satellite has been found, the LED light of
the satellite will become solid.
ENGLISH
07