Korg LP-380 Bedienungsanleitung Seite 15

Enabling/disabling program change transmis-
sion/reception filtering
You can send MIDI program change numbers from the LP-
380 to change programs on MIDI applications that are run-
ning on the computer that you have connected. Also, the
LP-380 can receive MIDI program change numbers sent
from a MIDI application running on the computer you
have connected, to change programs on the LP-380.
This will not change the sound you hear when playing
the keyboard of the LP-380.
For program change numbers and their corresponding
sounds, refer to "Table of sounds and corresponding pro-
gram change numbers" below.
To transmit/receive program change messages, disable this
function (oFF: default setting). To not transmit/receive the
messages, enable this function (on).
• Enter the MIDI function mode, and then press the
E.PIANO1 button.
The E.PIANO1 sound button lights up, and the setting
(oFF) appears in the display.
Transmitting program changes
When a sound is selected using the sound buttons and
BANK button on the LP-380, the corresponding MIDI pro-
gram change number is transmitted.
Receiving program changes
When the LP-380 receives a MIDI program change num-
ber, the sound is changed to the corresponding number.
If an incompatible program change number is re-
ceived, the LP-380 sound is not changed.
Table of sounds and corresponding program change
numbers
CC0: Bank Select (MSB) for all sounds is set to 121.
Sound Button Bank CC32
1 1
PIANO1
2 0
3 0
1 2
PIANO2
2 0
3 0
1 0
E.PIANO1
2 1
3 3
1 0
E.PIANO2
2 2
3 1
HARPSI/CLAV 1 0
2 0
3 1
VIBES/ 1 0
GUITAR 2 0
3 0
1 0
ORGAN1
2 1
3 0
1 0
ORGAN2
2 1
3 2
1 0
STRINGS
2 0
3 1
1 0
CHOIR
2 1
3 2
PC Sound
0 Classic Piano
0 Grand Piano
1
Jazz Piano
0
Live Piano
3 Honky-Tonk
2 Elec.Grand
4 Club E.piano
4 Vintage E.Piano
4 Tremoro EP
5 Dig.E.Piano1
4 60's E.Piano
5 Dig.E.Piano2
6 Harpsichord
7 Clav
7 Synth Clav
11 Vibraphone
12
Marimba
24 Acoustic Guitar
16 Jazz Organ1
16 Jazz Organ2
17 Jazz Organ3
19 Pipe Organ1
19 Pipe Organ2
19 Positive Organ
48 Strings
50 Cinema Strings
50 Analog Strings
52 Aah Choir
52 Ooh Voices
52 Classical Choir
Enabling/disabling control change transmission/
reception filtering
This lets you transmit damper pedal signals and other
data from the LP-380 to control a MIDI application run-
ning on your computer, or control the LP-380 as it receives
said data from the MIDI application on your computer.
To transmit/receive control change messages, disable this
function (oFF: default setting). To not transmit/receive the
messages, enable this function (on).
• Enter the MIDI function mode, and then press the
E.PIANO2 button.
The E.PIANO2 sound button lights up, and the setting
(oFF) appears in the display.
Using the LP-380 as a multi-timbral sound module
The 16-part multi-timbral sound generator on the LP-380
can be controlled and played from a MIDI application on
your computer.
1. Connect the USB port on the LP-380 to your computer
with a USB cable.
2. Transmit MIDI data from the sequencer or other ap-
plication on the connected computer.
For details on transmitting data from the sequencer or
other MIDI device, refer to its user's manual.
3. When the LP-380 receives the program change message
along with the performance data, it will play with the
sound corresponding to that program number.
If the LP-380 is not to be used as a multi-timbral sound
module, disable this function (oFF).
• Enter the MIDI function mode, and then press the
HARPSI/CLAV button.
The HARPSI/CLAV sound button lights up, and the
setting (on: default setting) appears in the display.
15