Connecting To Airline Audio Systems; Connecting To Dual Output Connectors; Connecting To A Single Output Connector - Bose QUIETCOMFORT 35 Bedienungsanleitung

C O N N E C T I N G H E A D P H O N E S U S I N G A C A B L E

Connecting to airline audio systems

You can connect to in-flight audio systems with the back-up audio cable and the
provided dual output connectors. The audio output connections vary, but they typically
have dual or single 3.5 mm output connectors.
WARNING: Do NOT use mobile phone adapters to connect headphones to airplane
seat jacks, as this could result in injury or property damage due to over-
heating.
Note: Airline audio may not equal the high-quality audio you experience from a home
stereo or portable source.

Connecting to dual output connectors

1. Plug the audio cable into the airline adapter.
2. Insert the adapter into the dual output connectors.
Dual 3.5 mm
plugs

Connecting to a single output connector

1. Pivot the movable plug so that it snaps in place against the airplane adapter.
Movable plug
2. Plug the audio cable into the adapter.
3. Insert the adapter into the single output connector.
Note: If you find that the volume level is too low, remove the adapter and plug the
audio cable directly into the 3.5 mm output connector.
Headphone
cord connector
E N G L I S H - 2 5