Secondary Audio Sources; Aux Connections - Bose A30 Bedienungsanleitung

You can connect your headset to a secondary audio source in two ways:
• AUX (wired) connection
• Bluetooth (wireless) connection (applies to Bluetooth models only)

AUX CONNECTIONS

Use the 3.5 mm AUX audio cable to connect a non-wireless device.
1. Make sure the Secondary Audio Mode switch is in the MUTE or MIX position
(see page 45) and the REVERSIONARY operation switch is set to OFF
(see page 28).
NOTE: If the Secondary Audio Mode switch is set to OFF or the REVERSIONARY
operation switch is set to ON, AUX audio functionality is disabled.
2. Connect the cable to the 3.5 mm AUX port on the back of the control module.
3. Connect the other end of the cable to the 3.5 mm port on your audio source.
NOTE: The functions of a connected AUX audio source are not controlled by
the control module.
SECON DA RY AUD I O SO UR C E S
3 8
|
E N G