Electrical Components - Nibe PVT 40 Installateurhandbuch

CONTENTS
Cable tie
4 x
Shunt valve
1 x
Insulation tape
AXC module
1 x
1 x
Temperature
Temperature
sensors
sensor panel
2 x
1 x
PVT 40 | GB
COMPONENT LOCATION, AXC MODULE
(AA25)
AA5
Heat conducting
paste
2 x
Aluminium tape
AA5-X9
2 x

ELECTRICAL COMPONENTS

AA5
AA25-FC1
AA25-X1
Designations according to standard EN 81346-2.
MOUNTING
Use all mounting points and install the module upright,
flat against the wall, with no part of the module protrud-
ing beyond the wall.
Leave at least 100 mm of free space around the module
to allow access and make cable routing easier during
installation and servicing.
AA5-X4
AA25-FC1
Accessory card
AA5-S2 DIP switch
AA5-X2 Terminal block, inputs
AA5-X4 Terminal block, communication
AA5-X9 Terminal block, outputs
Miniature circuit-breaker
Terminal block, power supply
Caution
The screw type must be adapted to the surface
on which installation is taking place.
AA5-S2
AA5-X2
AA25-X1
11