Cleaning And Care; Descaling - Unold 18715 Bedienungsanleitung

17. Always use fresh and cold water. Do not leave water in the kettle.
18. Switch off and unplug electrical appliances after use.
Boiling water can cause scalding. Therefore, please
handle the appliance with care when it contains hot
water.
The appliance becomes very hot during operation
and maintains the heat during some time after
disconnection.

CLEANING AND CARE

Before cleaning, always turn off the appliance
and unplug it from the power supply.
Allow the appliance to cool before cleaning it.
1. Do not immerse the base, power cord or kettle in water or other liquids or
wash them in the dishwasher.
2. Wipe off the base and the kettle with a damp cloth and a little dishwash-
ing detergent. Do not use any abrasive scouring agents, steel wool, metal
objects, hot cleaning agents or disinfectants, since they can damage the
appliance.
3. The appliance must be completely dry on the outside before you use it
again.

DESCALING

1. To keep the appliance operating efficiently and to prolong its service life,
it should be descaled regularly, depending on the hardness of your water.
2. Use off-the-shelf descaling products for electronic kettles and comply with
the manufacturer's instructions. To descale, fill the kettle half full, maxi-
mum, otherwise the liquid can boil over and can cause severe injuries.
3. Heat the liquid (do not boil!) and allow it to sit for some time in the elec-
tronic kettle.
4. Pour the descaling solution out of the kettle.
5. Then fill it with fresh water and bring to a boil. Pour this water out as well.
Then rinse out the kettle at least twice with clean water.
Stand 4.2.2020
Copyright UNOLD AG | www.unold.de
DE
EN
FR
NL
IT
ES
PL
21 von 64