Before Using The Appliance The First Time; Operation - Unold 18715 Bedienungsanleitung

BEFORE USING THE APPLIANCE THE FIRST TIME

1. Remove all packaging materials and any transport safety devices. Keep
packaging materials away from children - danger of suffocation!
2. Clean all parts with a damp cloth, as described in the chapter "Cleaning
and care".
3. Check to make sure that the appliance is stable.
4. Connect the base via the power cord to the power supply (220–240 V~,
50 Hz/60 Hz).
11. When the water boils, the appliance automatically shuts off.
12. For hygienic reasons, please discard the water from the first boiling.

OPERATION

Stand 4.2.2020
Copyright UNOLD AG | www.unold.de
5. Remove the kettle from the base.
6. Remove the kettle from the base to fill it with
water. Press the two buttons in the middle of
the lid (see Fig.). The lid will unlock and it can
be taken off.
7. Add clear, cold water to the "Max" marking.
8. Close the lid by pressing lightly.
9. Place the kettle level on the base.
10. Switch on the appliance by pressing the switch
on lower side of the kettle downward. If the ket-
tle is not correctly seated the appliance cannot
be switched on.
1. Remove the kettle from the base.
2. Remove the kettle from the base to fill it with
water. Press the two buttons in the middle of
the lid (see Fig.). The lid will unlock and it can
be taken off.
3. Fill the kettle with water (minimum 0.5 litres,
mark MIN, maximum 1.5 litres, mark MAX).
4. CAUTION!
If the kettle is overfilled, boiling water may be
ejected!
DE
EN
FR
NL
IT
ES
PL
19 von 64