Cleaning And Care - Unold 18415 Bedienungsanleitung

After making your selection, observe the following additional information:
14. A brief pause of the heating process before the desired temperature is
reached does not constitute an error. Short measuring intervals make it
possible to better control the heating of the water.
15. As soon as the water has reached the desired temperature, an acoustic
signal sounds, and the appliance switches off.
16. Before using the kettle again to heat water, allow the appliance to cool down
for a few minutes.
17. Boiling water can cause scalding. Therefore, always handle the appliance
with caution when it contains hot water.
18. The appliance features boil dry protection. If running without water or has
excessive limescale build-up, the appliance will be switched off by the boil
dry protection feature. Allow the appliance to cool down afterwards before
refilling it with water or descale the appliance as described in the chapter
"Descaling".
19. Press the "ON/OFF" button to switch off the appliance completely and
disconnect the power plug. Only then can you be sure the appliance is
safely switched off.
Boiling water can cause scalding. Therefore, always handle the appliance
with caution when it contains hot water.

CLEANING AND CARE

1. Do not immerse the base, power cord or kettle in water or other liquids or
wash them in the dishwasher.
2. Wipe off the base and the kettle with a damp cloth and a little dish washing
detergent. Do not use scratching sponges, abrasive scouring agents, steel
Stand 27.3.2023
Before cleaning the appliance, switch it off and disconnect the
plug from the power socket.
Let the appliance cool down before cleaning it.
DE
EN
FR
NL
IT
ES
PL
25 von 96