Troubleshooting - Yard Force Compact 280R Installationsanleitung

GB

Troubleshooting

Robotic Mower cannot dock with docking station
• Check that the boundary wire in front and underneath the charger is in a straight line.
• Check that the docking station's position is suitable as explained in this manual.
Robotic Mower runs in circles while mowing or while following
boundary wire back to docking station.
• Verify that no power cable runs parallel and in close proximity the boundary wire. If necessary,
reposition the boundary wire.
• Check if a front wheel is stuck.
• If a neighbor has a similar Robotic Mower, the signals may interfere. Try setting your docking
station and Robotic Mower to the alternative boundary signal.
• Driving motor may be damaged, please contact our customer support team.
The Robotic Mower is noisy.
• Inspect the blade fixing screws; tighten if necessary.
• Inspect the blades for damage; replace if necessary.
• Grass may be too high. Try increasing the cutting height, or mow the lawn with an ordinary
lawnmower first.
• Cutting motor failure, please call our customer support team.
Mower remains at or returns to docking station when pressing START
button
• Check if the mower has already completed the programmed working time for that day.
• Battery is low, give the Robotic Mower time to charge and try again.
LED signal indicator on docking station
S1 S2 S1 S2
Status
Battery charging faulty
Normal
S1 S2
LED Indicator ON LED Indicator flashing
Normal
S1 S2
Boundary wire broken
S1 S2
16
S1 S2
S1 S2
17
GB