Cleaning And Maintenance; Technical Specifications - EuroLite 36x1W RGB Bedienungsanleitung

CLEANING AND MAINTENANCE

The operator has to make sure that safety-relating and machine-technical installations are inspected by an
expert after every four years in the course of an acceptance test.
The operator has to make sure that safety-relating and machine-technical installations are inspected by a
skilled person once a year.
The following points have to be considered during the inspection:
1) All screws used for installing the devices or parts of the device have to be tightly connected and must not
be corroded.
2) There must not be any deformations on housings, fixations and installation spots (ceiling, suspension,
trussing).
3) The electric power supply cables must not show any damages, material fatigue (e.g. porous cables) or
sediments. Further instructions depending on the installation spot and usage have to be adhered by a
skilled installer and any safety problems have to be removed.
We recommend a frequent cleaning of the device. Please use a soft lint-free and moistened cloth. Never use
alcohol or solvents!
There are no serviceable parts inside the device. Maintenance and service operations are only to be carried
out by authorized dealers.
Should you need any spare parts, please use genuine parts.
If the power supply cable of this device becomes damaged, it has to be replaced by authorized dealers only
in order to avoid hazards.
Should you have further questions, please contact your dealer.

TECHNICAL SPECIFICATIONS

Power supply:
Power consumption:
Number of DMX channels:
DMX connection:
Protection grade:
Number of LEDs:
Type of LEDs:
Beam angle:
Dimensions (LxWxH):
Weight:
Maximum ambient temperature T
Maximum housing temperature T
Min. distance from flammable surfaces:
Min. distance to lighted object:
Accessory:
230V cable for LED-Par IP65, 5m
Please note: Every information is subject to change without prior notice. 17.09.2012 ©
DANGER TO LIFE!
Disconnect from mains before starting maintenance operation!
LED IP PAR 36x1W RGB
230 V AC, 50 Hz ~
50 W/90 VA
3/5
3-pin screw connector
IP 65
36
1 W
15°
200 x 240 x 320 mm
3.75 kg
: 45° C
a
: 60° C
C
0.5 m
0.1 m
No. 51914197
23/23
LED IP PAR 12x3W TCL
230 V AC, 50 Hz ~
50 W/90 VA
3/5
3-pin screw connector
IP 65
12
3 W, TCL
25°
200 x 240 x 320 mm
3.75 kg
45° C
60° C
0.5 m
0.1 m
No. 51914197
00063704.DOC, Version 1.1