Stand Alone-Mode; Control Board - EuroLite 36x1W RGB Bedienungsanleitung

Stand Alone-Mode

In the Stand Alone mode, the LED IP PAR 36x1W RGB/LED IP PAR 12x3W TCL can be used without
controller.
Disconnect the LED IP PAR 36x1W RGB/LED IP PAR 12x3W TCL from the controller.

Control Board

The Control Board offers several features: you can simply set the starting address or run the internal
programs.
Browse through the main menu by pressing MODE. You can change the selection by pressing Up or Down.
Confirm every selection by pressing the Enter-button. The functions provided are described in the following
sections. You can leave every mode by pressing the MODE-button.
Setting the DMX Start Address:
Mode:
Addr
Setting DMX Mode
Mode:
05CH (default setting)
CH
Setting solid colors:
When the display shows C, you can select the desired solid color. Please see the following table.
Mode:
C
Setting internal programs:
When the display shows P, you can select the desired internal program. Please see following table.
Mode:
P
Setting LED colors (0 – 100%):
You can select the dimmer itensity of the LED colors (from 0 to 100 % [1-255]).
Please see the following table.
Mode: Value:
r 1 - 255
G 1 - 255
b 1 - 255
Value:
1 - 512
Value:
03CH
Value:
C01
C02
C03
C04
C05
C06
C07
Value:
P01
P02
P03
P04
Function:
Red (0-100%)
Green (0-100%)
Blue (0-100%)
Function:
Red
Yellow
Green
Cyan
Blue
Magenta
White
Function:
Endless loop in 7 colors,
change every 3 seconds
Endless loop in 7 colors,
fade every 3 seconds
Endless loop in 3 colors,
change every 3 seconds
Endless loop in 3 colors,
fade every 3 seconds
21/23 00063704.DOC, Version 1.1