Herunterladen Inhalt Inhalt Diese Seite drucken

Maintenance; Specifications - Makita DMR106 Betriebsanleitung

Baustellenradio
Vorschau ausblenden Andere Handbücher für DMR106:
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 20
Charging with USB power supply port
(Fig. 9)
• The maximum volume of the output power speaker will
decrease when your USB is charging.
• The USB socket can provide max 1A5V of electrical
current.
Important:
• Before connecting USB device to the charger, always
backup your data of USB device. Otherwise your data
may lose by any possibility.
• The charger may not supply power to some USB
devices.
• When not using or after charging, remove the USB
cable and close the cover.
• Do not connect power source to USB port. Otherwise
there is risk of fire. The USB port is only intended for
charging lower voltage device. Always place the cover
onto the USB port when not charging the lower voltage
device.
• Do not insert a nail, wire, etc. into USB power supply
port. Otherwise a circuit short may cause smoke and
fire.
• Do not connect this USB socket with your PC USB
port, as it is highly possible that it may cause
breakdown of the units.

MAINTENANCE

CAUTION:
• Never use gasoline, benzine, thinner, alcohol or the
like. Discoloration, deformation or cracks may result.

Specifications:

Power Requirements
AC power adaptor
Battery
Frequency coverage
®
Bluetooth
®
Bluetooth
QD ID
®
Bluetooth
version
®
Bluetooth
profiles
Transmission power
Transmission range
Supported codec
®
Compatible Bluetooth
profile
Circuit feature
Loudspeaker
DC12 V/1,200 mA, center pin
positive
UM-3 (AA size) x 2 for back up
Cluster battery: 7.2 V - 10.8 V
Slide battery: 14.4 V - 18 V
FM 87.50 - 108 MHz
(0.05 MHz/step)
AM (MW) 522 - 1,629 kHz
(9 kHz/step)
58625
®
(The Bluetooth
word mark and
logos are registered trademarks
owned by Bluetooth SIG, Inc.)
4.0
A2DP/SCMS-T
®
Bluetooth
specification power
Class 2
Max. 10 m (varies according to
usage conditions)
SBC
A2DP
3.5 inches 8 ohm x 2
Output Power
Input terminal
Antenna system
Dimension (W x H x D) in mm
Weight
7.2 V: 0.5 W x 2
10.8 V:1.2 W x 2
14.4 V: 2.2 W x 2,
18 V: 3.5 W x 2
3.5 mm dia. (AUX IN1/AUX IN2)
FM: soft bended rod antenna
AM: bar antenna
282 x 294 x 163
4.3 kg (without battery)
11

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis