Auxiliary Input Socket; Specifications; Maintenance - Makita MR001G Betriebsanleitung

1. Press and hold the Power button for more than 2
seconds, followed by a beep tone, the display will
cycle through the available sleep time in the order 60-
45-30-15-120-90-60. Release the Power button when
the required sleep time appears on the display. The
sleep symbol will appear on the display and the radio
will play the last station selected.
2. To cancel the sleep function, press the Power button.
The sleep symbol will disappear and radio is off.
Display illumination
Press any buttons or rotate Tuning control knob will
illuminate the LCD display for approx. 15 seconds.
During scanning stations and alarm activated will also
automatically illuminate the display.

AUXILIARY INPUT SOCKET

A 3.5mm Auxiliary input socket is provided at the front
of your radio to permit an audio signal to be fed into the
unit from an external audio device such as a MP3 or CD
player.
1. Connect an external audio source (for example, MP3
or CD player) to the AUX IN socket.
2. Press the Power button to switch on your radio.
3. Repeatedly press and release the Band button until
"AU" is displayed.
4. To have the better sound quality, we recommend
setting the volume to more than two-thirds level on
your audio device and then adjust the volume on the
radio as required.
Note: Audio cord is not included as standard
accessories. AUX can't be activated as alarm source.

MAINTENANCE

CAUTION:
● Never use gasoline, benzine, thinner, alcohol or the
like. Discoloration, deformation or cracks may result.
● Do not wash the speaker with water.

SPECIFICATIONS

Power requirements
AC power adaptor
Battery
Frequency coverage
Circuit feature
Loudspeaker
Output power
Input terminal
Antenna system
Dimensions (L x W x H) 278 x 170 x 298 mm
Weight
11 ENGLISH
DC 12V 0.7A, center pin
positive
UM-3 (AA size) x 2 for back
up
Slide battery: 10.8V - 36V
FM 87.50-108MHz
(0.05MHz/step)
AM (MW) 522-1,710kHz
(9kHz/step)
3.5 inches 8 ohm x 2
10.8V-12V max: 1.2W x 2
14.4V: 2.2W x 2
18V: 3.5W x 2
36V: 5W x 2
3.5mm dia. (AUX IN)
FM: Built-in antenna
AM: bar antenna
4.3Kg
(without battery)