Herunterladen Inhalt Inhalt Diese Seite drucken

Aquarium Cabinet Installation And Preparation; Placing The Aquarium With Its Cabinet In The Final Location - Fluval Roma Gebrauchsanleitung

Led-strip-light und aquarium
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

Maintenance
For LED Strip Light and tank, refer to LED Strip Light and tank maintenance on page 11. For any maintenance
of the other devices, please refer to their respective manuals.
AQUARIUM CABINET INSTALLATION AND
PREPARATION

Placing the aquarium with its cabinet in the final location

Please refer to the instruction manual of the aquarium cabinet. Do not attempt to set up the cabinet without
reading and following the instruction manual. If it is missing or unusable, contact the store or Hagen Customer
Service.
Location of the aquarium is very important. Place the aquarium away from direct sunlight. This will reduce
the risks of excessive algae build-up and avoid overheating the aquarium by the sun's rays. Keep your Fluval
Aquarium away from other sources of heat (air ducts, radiators, etc.) for proper temperature maintenance. Drafts
should also be avoided. Do not locate your Fluval Aquarium where water spills will cause damage.
You MUST place the Fluval aquarium on the appropriate Fluval cabinet which was designed with the
correct dimensions and structure to bear the weight of the aquarium full of water. The use of different
cabinets, articles of furniture, TV stands, etc. WILL invalidate your guarantee and will compromise the
product safety.
IMPORTANT: Fluval cabinets are designed to support the total weight of the aquarium. The table below shows
the approx. height of filling of the tank and approx. weight of the aquarium full of water (rocks, decorations or
gravel have not been considered).
MODEL
Fluval Roma 90
60 x 35 x 45 cm (23.6 x 13.8 x 17.7")
Fluval Roma 125
80 x 35 x 45 cm (31.5 x 13.8 x 17.7")
Fluval Roma 200
100 x 40 x 50 cm (39.4 x 15.7 x 19.7")
Fluval Roma 240
120 x 40 x 50 cm (47.2 x 15.7 x 19.7")
MODEL
Fluval Vicenza 180
92 x 41 x 55 cm (36.2 x 16.1 x 21.6")
Fluval Vicenza 260
121 x 46 x 64 cm (47.6 x 18.1 x 25.1")
Fluval Venezia 190
98 x 70 x 60 cm (38.5 x 27.5 x 23.6")
Fluval Venezia 350
122 x 87 x 65 cm (48 x 34.2 x 25.5")
WARNING: Assure that the selected position has an even and level surface which is able to support the
total weight of the aquarium full of water and the cabinet. Place your new Fluval Aquarium and cabinet
close to an electrical outlet. After placing the cabinet, assure that it is perfectly level by using an adequate
level.
IMPORTANT: Place the aquarium tank directly on the cabinet without any additional support or damper
in between. NEVER insert any lining (e.g. Polystyrene) between cabinet and aquarium.
Never attempt to move or transport the cabinet with the glass tank or any
other load on top of it.
Peel off the protective film on the decor strip (only applies to gloss black decor
strips).
FLUVAL ROMA LED
TANK DIMENSIONS
FLUVAL VICENZA and VENEZIA LED
TANK DIMENSIONS
HEIGHT OF FILLING (up to the
max water level line)
41.5 cm (16.3")
41.5 cm (16.3")
46 cm (18.1")
46 cm (18.1")
HEIGHT OF FILLING (up to the
max water level line)
45 cm (17.7")
54 cm (21.2")
50 cm (19.6")
55 cm (21.6")
WEIGHT OF AQUARIUM
FULL WITH WATER
105 kg (231 lb)
138 kg (304 lb)
222 kg (489 lb)
265 kg (584 lb)
WEIGHT OF AQUARIUM
FULL WITH WATER
225 kg (495 lb)
370 kg (815 lb)
265 kg (584 lb)
440 kg (970 lb)
7

Werbung

Inhaltsverzeichnis
loading

Diese Anleitung auch für:

VicenzaVenezia

Inhaltsverzeichnis